System and Network Management

 View Only
  • 1.  G450 SNMP configuration for Solarwinds

    Posted 12-27-2018 01:39 PM
    Edited by Mark Flath 12-27-2018 04:07 PM

    Greetings all.  I am anew member here, so please bear with me.

    I am trying to get the G450's and Solarwinds to talk to each other, but SW is failing at the "test" portion of adding a node.  

    I know that I am connecting correctly because here is what i get when I change password and then use the correct passwords when doing an snmpwalk:

    Bad auth password/good priv password:
    snmpwalk: Authentication failure (incorrect password, community or key)

    Good auth password/Bad priv password:
    Timeout: No Response from 10.6.x.x

    Correct passwords for auth/priv:
    Error in packet.
    Reason: authorizationError (access denied to that object)


    Mark Flath

    Mark Flath
    Telecom Engineer III
    Answer Financial Inc
    Encino CA

  • 2.  RE: G450 SNMP configuration for Solarwinds

    Posted 02-01-2019 09:24 AM
    Edited by Pawel J. 02-01-2019 09:24 AM
    Hi, we were able to add MGs into Solarwind easily (at least my Network Team does). Just you must enable SNMP (v1) on MG first by 'snmp-server community read-only [cummunity_name] read-write [cummunity_name]' command.

    Paweł J.
    Unified Communication Specialist

  • 3.  RE: G450 SNMP configuration for Solarwinds

    Posted 02-01-2019 10:45 AM

    We are good now.  Stupid me, I had a case sensitivity issue with the read-write community.


    there is no V3configView

    it should be v3configView


    Thank you, and God Bless.

    Mark Flath |  Answer Financial Inc.
    Phone (818) 644-4545 |  Fax (818) 644-4466