FAQs, Helpful Tips, and Screenshots

Hi everyone, my questions is: 1- How long  ( time ,secs, minutes, hours ) does the CDR buffer store if I only have a primary device ( link down )?
2- 17326 records corresponds to each device ( Primary / Second ) ?
3- what is 1900 records ?
4- each call corresponds to a record?
5- how is it interpreted in size ( KB, MB ) ?
My PBX is  Main S8700  ( cluster )   version 6.3 , the CDR doesn´t  store on local disk.
Thanks.
Regards,

------------------------------
Gustavo Caracciolo
Customer Support Engineer
Avaya
Buenos Aires
------------------------------

Hi,
What do you have in status cdr-link output ?
CDR Buffer % Full: ?
Are you going to empty the buffer ?
Do not do reset board unless you are going to empty the buffer.
Each call corresponds to a record.

------------------------------
Ruslan Makrushin
Forum Moderator
Senior System Administrator
Rostelecom Digital Technologies
Moscow
------------------------------

Original Message:
Sent: 10-21-2022 03:04 PM
From: Gustavo Caracciolo
Subject: BUFFER CDR

Hi everyone, my questions is: 1- How long  ( time ,secs, minutes, hours ) does the CDR buffer store if I only have a primary device ( link down )?
2- 17326 records corresponds to each device ( Primary / Second ) ?
3- what is 1900 records ?
4- each call corresponds to a record?
5- how is it interpreted in size ( KB, MB ) ?
My PBX is  Main S8700  ( cluster )   version 6.3 , the CDR doesn´t  store on local disk.
Thanks.
Regards,

------------------------------
Gustavo Caracciolo
Customer Support Engineer
Avaya
Buenos Aires
------------------------------

Hi Ruslan , simple question: It is possible to know in time (approximately) how much that buffer can save if the link goes down?  10, 30 min, 1 hour, 2 hours  , less or more?
I know it depends on several factors.on the type of calls, daily, night, weekends, the extensions,agents, etc
Thanks.

Regards!



------------------------------
Gustavo Caracciolo
Customer Support Engineer
Avaya
Buenos Aires
------------------------------

Original Message:
Sent: 10-31-2022 02:14 PM
From: Ruslan Makrushin
Subject: BUFFER CDR

Hi,
What do you have in status cdr-link output ?
CDR Buffer % Full: ?
Are you going to empty the buffer ?
Do not do reset board unless you are going to empty the buffer.
Each call corresponds to a record.

------------------------------
Ruslan Makrushin
Forum Moderator
Senior System Administrator
Rostelecom Digital Technologies
Moscow

Original Message:
Sent: 10-21-2022 03:04 PM
From: Gustavo Caracciolo
Subject: BUFFER CDR

Hi everyone, my questions is: 1- How long  ( time ,secs, minutes, hours ) does the CDR buffer store if I only have a primary device ( link down )?
2- 17326 records corresponds to each device ( Primary / Second ) ?
3- what is 1900 records ?
4- each call corresponds to a record?
5- how is it interpreted in size ( KB, MB ) ?
My PBX is  Main S8700  ( cluster )   version 6.3 , the CDR doesn´t  store on local disk.
Thanks.
Regards,

------------------------------
Gustavo Caracciolo
Customer Support Engineer
Avaya
Buenos Aires
------------------------------

The buffer is in MB, not in time.  It is highly dependent on your site and how many calls you process.

For even the largest Avaya sites, it would be > an hour in most cases.  But again, it all depends on your setup.

------------------------------
Nick Kwiatkowski
Director of Design and Engineering
Michigan State University
East Lansing MI
------------------------------

Original Message:
Sent: 10-31-2022 06:16 PM
From: Gustavo Caracciolo
Subject: BUFFER CDR

Hi Ruslan , simple question: It is possible to know in time (approximately) how much that buffer can save if the link goes down?  10, 30 min, 1 hour, 2 hours  , less or more?
I know it depends on several factors.on the type of calls, daily, night, weekends, the extensions,agents, etc
Thanks.

Regards!

------------------------------
Gustavo Caracciolo
Customer Support Engineer
Avaya
Buenos Aires

Original Message:
Sent: 10-31-2022 02:14 PM
From: Ruslan Makrushin
Subject: BUFFER CDR

Hi,
What do you have in status cdr-link output ?
CDR Buffer % Full: ?
Are you going to empty the buffer ?
Do not do reset board unless you are going to empty the buffer.
Each call corresponds to a record.

------------------------------
Ruslan Makrushin
Forum Moderator
Senior System Administrator
Rostelecom Digital Technologies
Moscow

Original Message:
Sent: 10-21-2022 03:04 PM
From: Gustavo Caracciolo
Subject: BUFFER CDR

Hi everyone, my questions is: 1- How long  ( time ,secs, minutes, hours ) does the CDR buffer store if I only have a primary device ( link down )?
2- 17326 records corresponds to each device ( Primary / Second ) ?
3- what is 1900 records ?
4- each call corresponds to a record?
5- how is it interpreted in size ( KB, MB ) ?
My PBX is  Main S8700  ( cluster )   version 6.3 , the CDR doesn´t  store on local disk.
Thanks.
Regards,

------------------------------
Gustavo Caracciolo
Customer Support Engineer
Avaya
Buenos Aires
------------------------------

Thanks Nick, ok , I will pass your comments on to my client.
I hope the answer is accepted


Regards!

------------------------------
Gustavo Caracciolo
Customer Support Engineer
Avaya
Buenos Aires
------------------------------

Original Message:
Sent: 11-01-2022 07:27 AM
From: Nick Kwiatkowski
Subject: BUFFER CDR

The buffer is in MB, not in time.  It is highly dependent on your site and how many calls you process.

For even the largest Avaya sites, it would be > an hour in most cases.  But again, it all depends on your setup.

------------------------------
Nick Kwiatkowski
Director of Design and Engineering
Michigan State University
East Lansing MI

Original Message:
Sent: 10-31-2022 06:16 PM
From: Gustavo Caracciolo
Subject: BUFFER CDR

Hi Ruslan , simple question: It is possible to know in time (approximately) how much that buffer can save if the link goes down?  10, 30 min, 1 hour, 2 hours  , less or more?
I know it depends on several factors.on the type of calls, daily, night, weekends, the extensions,agents, etc
Thanks.

Regards!

------------------------------
Gustavo Caracciolo
Customer Support Engineer
Avaya
Buenos Aires

Original Message:
Sent: 10-31-2022 02:14 PM
From: Ruslan Makrushin
Subject: BUFFER CDR

Hi,
What do you have in status cdr-link output ?
CDR Buffer % Full: ?
Are you going to empty the buffer ?
Do not do reset board unless you are going to empty the buffer.
Each call corresponds to a record.

------------------------------
Ruslan Makrushin
Forum Moderator
Senior System Administrator
Rostelecom Digital Technologies
Moscow

Original Message:
Sent: 10-21-2022 03:04 PM
From: Gustavo Caracciolo
Subject: BUFFER CDR

Hi everyone, my questions is: 1- How long  ( time ,secs, minutes, hours ) does the CDR buffer store if I only have a primary device ( link down )?
2- 17326 records corresponds to each device ( Primary / Second ) ?
3- what is 1900 records ?
4- each call corresponds to a record?
5- how is it interpreted in size ( KB, MB ) ?
My PBX is  Main S8700  ( cluster )   version 6.3 , the CDR doesn´t  store on local disk.
Thanks.
Regards,

------------------------------
Gustavo Caracciolo
Customer Support Engineer
Avaya
Buenos Aires
------------------------------