So J100 phones ship with SIP firmware so two questions.
1) Do you have a System & Session Manager?
2) Has the system been configured to support SIP stations?
Minimum CM release is 6.3 to support J100 series phones.
If you do not have a System / Session Manager your and the system has not been configured to support SIP Stations then you will need to flash the phone firmware to H.323.
Regarding set type chooses a 9630 as J159 native support requires release 8.x.
------------------------------
J Zucchetto
Director of Unified Communication & Collaboration
Cerium Networks
Spokane WA
------------------------------
Original Message:
Sent: 08-17-2021 12:04 PM
From: Dwayne Rattan
Subject: How to add J159 on Aura 7.1.3
Hi
I have extensive knowledge in the Cisco UC world. I have a simple job to add on J100 series phones but I am not sure on the procedure to perform this.
I created user on CM but the phone type is greyed out. Can anyone provide me with the steps needed?
------------------------------
Dwayne Rattan
Mr
PBS Technologies
Miami FL
------------------------------