Hi guyz,
I'v a problem in BSR:
I tried to do everything by the book but the features didnt work :(
I checked all the requirement, maybe I missed something but here I post the vectors, VDNs and BSR application, can any1 tell me what to do..
the primary VDN:
Extension: 5314
Name: BSR test
Vector Number: 34 Attendant Vectoring? n
Meet-me Conferencing? n
Allow VDN Override? n COR: 1 this is high enough to access the IP trunk
TN: 1
Measured: none
VDN of Origin Annc. Extension:
1st Skill:
2nd Skill:
3rd Skill:
AUDIX Name:
Return Destination:
VDN Timed ACW Interval:
BSR Application: 1 BSR Available Agent Strategy: EAD-MIA Observe on Agent Answer? n
Display VDN for Route-To DAC? n
VDN Override for ISDN Trunk ASAI Messages? n
BSR Local Treatment? yThe primary vector:
Number: 34 Name: BSR test
Multimedia? n Attendant Vectoring? n Meet-me Conf? n Lock? n
Basic? y EAS? y G3V4 Enhanced? y ANI/II-Digits? y ASAI Routing? y
Prompting? y
LAI? y G3V4 Adv Route? y CINFO? y
BSR? y Holidays? y
Variables? y 3.0 Enhanced? y
01 wait-time 0 secs hearing silence
02 consider skill 30 pri m adjust-by 0
03 consider location 1 adjust-by 0
04 queue-to best05
06
The BSR application:
Number: 1 Name: Test BSR Maximum Suppression Time: 30 Lock? n
Num Location Name Switch Node Status Poll VDN Interflow VDN Net Redir?
1 8034019 803718 n n
n
the remote poll VDN:
Extension: 4019
Name*: BSR test
Vector Number: 98
Attendant Vectoring? n
Meet-me Conferencing? n
Allow VDN Override? n
COR: 1
TN*: 1
Measured: none
VDN of Origin Annc. Extension*:
1st Skill*:
2nd Skill*:
3rd Skill*:
AUDIX Name:
Return Destination*:
VDN Timed ACW Interval*:
BSR Application*:
BSR Available Agent Strategy*: EAD-MIA BSR Tie Strategy*: system
Observe on Agent Answer? n
Display VDN for Route-To DAC*? n
VDN Override for ISDN Trunk ASAI Messages*? n
BSR Local Treatment*? n
remote poll vector :
CALL VECTOR
Number: 98 Name: BSR test
Multimedia? n Attendant Vectoring? n Meet-me Conf? n Lock? n
Basic? y EAS? y G3V4 Enhanced? y ANI/II-Digits? y ASAI Routing? n
Prompting? y
LAI? y G3V4 Adv Route? y CINFO? y
BSR? y Holidays? y
Variables? y 3.0 Enhanced? y
01 consider skill 90 pri m adjust-by 0
02 reply-best03
04
05
the problem is that the BSR seems unable to get out of the local PBX coz I traced the TAC and it didnt try to go through it!! the trunk is in use and normal calls goes in both directions, when I tried the TAC in the BSR application the try went through but the trace of the primary vector gave me "bad response from poll" and the remote site's poll vector was probed and replies. BSR is working fine localy.