Note - Always consider pilot testing before making such big move.
1. Need SIP OPTIM trunks between CM and SM (try using port 5070)
2. Update private numbering table for PPM
3. Update off-pbx-station table
4. Update CM station form with correct set type
5. Build CM OPTIM SIP entity and entity links
6. Define 5070 listening port on SM SIP entity with endpoint checkbox
7. Add CM as a managed element on SMGR and synchronize it
8. Build SIP user profile
9. Build application sequencing for AST and PPM features
10. Build 46xx settings file with SIP options
11. Flash pilot group phones wit SIP firmware
Important 46xx settings parameters:
SET SIG 2
SET SIPDOMAIN lab.mydomain.com
SET SIP_CONTROLLER_LIST <SM01-SM100>:5061;transport=tls,<SM02-SM100>:5061;transport=tls
SET ENABLE_PPM_SOURCED_SIPPROXYSRVR 0
SET SIMULTANEOUS_REGISTRATIONS 3
SET FAILBACK_POLICY auto
SET SIPREGPROXYPOLICY simultaneous
SET MEDIAENCRYPTION 1
SET TRUSTCERTS slamonRootCA.crt,smgr-tmdefaultca.txt
------------------------------
Sushant Haware
APS Consultant
Avaya India Pvt Ltd.
Pune
------------------------------
Original Message:
Sent: 07-01-2021 07:48 AM
From: Arslan Ali
Subject: H.323 to SIP Phones Conversion
Dear All,
We are planing to migrate 2000 Plus H.323 phones (96xx and J Series) to SIP phone. Aura 8.1 environment.
Please share some of your experiences in doing so, what are the steps which I should follow and the caveats which I should take into prior considerations. Any document on this topic would also be helpful.
------------------------------
Arslan Ali
UC Consultant
Vodafone
------------------------------