Unified Communications

 View Only
  • 1.  Presence 8.1.3 (Anyone implemented this?)

    Posted 04-01-2021 06:24 AM
    I have been scratching my head on this on the implementation. Manual is very confusing.

    I want to understand if:

    1. Is Breeze Cluster IP address requires to be pingable in the network or not? 
    2. Is Breeze Cluster FQDN should be mapped into the assigned Breeze Cluster IP Address only or do i have to map the IP Address of the Breeze SM100?

    My setup is i have 2 Breeze nodes (2 OVA in a cluster)

    ------------------------------
    Jesryll Jimenez
    Telecommunications Engineer
    Standard Chartered Bank
    Singapore
    ------------------------------


  • 2.  RE: Presence 8.1.3 (Anyone implemented this?)

    Posted 04-08-2021 06:44 PM
    If you have multiple Breeze nodes in a cluster, you should have everything pointing to either the cluster IP or cluster hostname.  Each node will have it's own FQDN as well (you will need to make sure that hostname is also in your DNS server for both the breeze server as well as the SM100 IP).  The cluster IP and FQDN should be pingable and you should be able to get HTTPS responses from both addresses.

    ------------------------------
    Nick Kwiatkowski
    Director of Design and Engineering
    Michigan State University
    East Lansing MI
    ------------------------------



  • 3.  RE: Presence 8.1.3 (Anyone implemented this?)

    Posted 04-09-2021 07:44 AM
    Hi Nick,

    Thank you for the response. What cluster are you referring to? Breeze Cluster or Presence Cluster?  


    ------------------------------
    Jesryll Jimenez
    Telecommunications Engineer
    Standard Chartered Bank
    Singapore
    ------------------------------