Maintenance and Services

 View Only
  • 1.  Alarm when backup CM is not communicating with the primary CM

    Posted 12-07-2017 01:34 PM

    Hi,

    we have a location with an ESS HP DL360 server configured as backup CM with a G650 cabinet.

    IPSI cards on that cabinet is registerred on our Primary CM to another location.

    Someone shut down the HP DL360 by error and we never got an alarm saying that it was down.

    Couple days after, we did a "list survivable-processor" and we see that the ESS wasn't registered.

     

    My question, it is possible to configure the Primary CM to send alarm when backup CM goes offline??

    when I verified the "disp alarms" , I didn't see alarm for it.

     

    Thanks!

     

    Luc P.



  • 2.  Alarm when backup CM is not communicating with the primary CM

    Posted 12-08-2017 10:54 AM
    You should have see "SP-REG-M" minor alarm. You can look at display alarms and search "resolved" and enter the time frame for when the lsp was down.

    On ‎Thursday‎, ‎December‎ ‎7‎, ‎2017‎ ‎01‎:‎33‎:‎38‎ ‎PM‎ ‎PST, luc parent <iaug-ags@lists.iaug.org> wrote:


    Hi,

    we have a location with an ESS HP DL360 server configured as backup CM with a G650 cabinet.

    IPSI cards on that cabinet is registerred on our Primary CM to another location.

    Someone shut down the HP DL360 by error and we never got an alarm saying that it was down.

    Couple days after, we did a "list survivable-processor" and we see that the ESS wasn't registered.

     

    My question, it is possible to configure the Primary CM to send alarm when backup CM goes offline??

    when I verified the "disp alarms" , I didn't see alarm for it.

     

    Thanks!

     

    Luc P.

    Site Links: View post online   View mailing list online   Start new thread via email   Unsubscribe from this mailing list   Manage your subscription  

    This email has been sent to: bhanson184@yahoo.com

    Use of this email content is governed by the terms of service at:
    http://www.iaug.org/p/cm/ld/fid=2


  • 3.  RE: Alarm when backup CM is not communicating with the primary CM

    Posted 12-08-2017 10:58 AM

    Thanks bob, I already got my answer in the other forum section!

    I found it and resolve my problem :)

    thanks again!