System and Network Management

 View Only

Major/Minor alarms on the S8800 standby server

  • 1.  Major/Minor alarms on the S8800 standby server

    Posted 12-29-2015 02:58 AM

    Good day all,

     

    I'm new on this forum. I have a question regarding the CNC (Control Network C).

     

    I recently did the PN-4 (CNC) and everything was working fine.

     

    Today, I’ve found alarms and errors as below through the web interface:

     

    Any idea how to fix these problems?

     

     

    1.       Status Summary



     

    The Status Summary Web page displays information about the status and the overall health of the server.

    Top of Form

                                    SERVER STATUS                              

                                                                                

                                    Cluster ID: 001                     

                                   Duplication: sw                      

                                Standby Busied? no                      

                             Standby Refreshed? yes                     

                             Standby Shadowing: on                      

                              Duplication Link: up                       

                        Active RAID HDD Status: 2

           Elapsed Time since Init/Interchange: 490d 01:39:55                    

                                                                                

                   District2                               Disrtict1          

                                                                                

                    ID: 002 (2)                             ID: 001 (1)        

                  Mode: Active                            Mode: Standby        

          Major Alarms: yes                       Major Alarms: no             

          Minor Alarms: yes                       Minor Alarms: no             

       Control Network:  4 / 4 / 4             Control Network:  3 / 3 / 4     

    Processor Ethernet: unused              Processor Ethernet: unused          

           PE Priority:                            PE Priority:         

       Server Hardware: okay                   Server Hardware: okay           

             Processes: okay                         Processes: okay           

       RAID HDD Status: 2

    Bottom of Form

     

    Major alarm and Major alarm on Active server: Control Network:  4 / 4 / 4            

     

    2.       IPSI Version Results are visible from Active server IP-address:

     

    View IPSI Version Results 

     

    Top of Form

    This may take 1 seconds ...

           IPaddress           IPSI Name       IPSIBoard   HW#   FW#

     

      10.191.240.200           ipsi-A04a        TN2312BP    15    30

       198.152.255.3           ipsi-A03b        TN2312BP    15    30

       198.152.254.3           ipsi-A03a        TN2312BP    15    30

       198.152.255.2           ipsi-A02b        TN2312BP    15    30

       198.152.254.2           ipsi-A02a        TN2312BP    15    30

       198.152.255.1           ipsi-A01b        TN2312BP    12    12

       198.152.254.1           ipsi-A01a        TN2312BP    15    30

    Bottom of Form

    3.       IPSI Version Results is not visible from Standby server IP-address:

     

     

    View IPSI Version Results 

     

    Top of Form

    This may take 1 seconds ...

           IPaddress           IPSI Name       IPSIBoard   HW#   FW#

     

      10.191.240.200           ipsi-A04a  Not available.

       198.152.255.3           ipsi-A03b        TN2312BP    15    30

       198.152.254.3           ipsi-A03a        TN2312BP    15    30

       198.152.255.2           ipsi-A02b        TN2312BP    15    30

       198.152.254.2           ipsi-A02a        TN2312BP    15    30

       198.152.255.1           ipsi-A01b        TN2312BP    12    12

       198.152.254.1           ipsi-A01a        TN2312BP    15    30

    Bottom of Form

    4.       IP SERVER INTERFACE INFORMATION AS BELLOW:

     

     

    IP SERVER INTERFACE INFORMATION 

    Port Pri/ Primary/ Primary/ Primary/ State Of 
    Ntwk Sec Secondary Secondary Secondary Serv Control Health 
    Num Bd Loc IP Address Host Name DHCP ID State State C P E G 
    ---- ------ --------------- ---------------- --------- ----- ------- ------- 
    1. 1A01 199.172.254.1 199.172.254.1 ipsi-A01a IN actv-aa 0.0.0.0 
    1B01 199.172.255.1 199.172.255.1 ipsi-A01b IN standby 0.0.0.0 
    2. 2A01 199.172.254.2 199.172.254.2 ipsi-A02a IN actv-aa 0.0.0.0 
    2B01 199.172.255.2 199.172.255.2 ipsi-A02b IN standby 0.0.0.0 
    3. 3A01 199.172.254.3 199.172.254.3 ipsi-A03a IN actv-aa 0.0.0.0 
    3B01 199.172.255.3 199.172.255.3 ipsi-A03b IN standby 0.0.0.0 
    4. 4A01 10.189.2.67 10.189.2.67 ipsi-A04a IN actv-aa 0.0.0.0
     

     

    Note: there is only one IPSI card in the PN-4 with 10.189.2.67

     

    Software Version:

     

    1.       CM Reports as:  R015x.02.1.016.4

    2.       CM Release String:  S8800-015-02.1.016.4

     

    NO any alarms/errors from the ASA (Avaya site administration)

     

    Thanks, Yerbol