Inactive Forum User
    Hy,

    i have a Avaya G3 Version: V9 white 2 cabinet A and B Dupliated with some error :

    display errors
    HARDWARE ERROR REPORT - ACTIVE ALARMS

    Port Mtce Alt Err Aux First Last Err Err Rt/ Al Ac
    Name Name Type Data Occur Occur Cnt Rt Hr St

    01A SHDW-CIR 1025 257 05/08/07:24 05/21/12:02 255 0 8 a y
    01A STBY-SPE 257 2337 05/21/11:51 05/21/12:02 3 16 2 a y
    01A STBY-SPE 1 2024 05/21/12:01 05/21/12:02 2 120 2 a y
    01A STBY-SPE 58 17410 05/21/12:03 05/21/12:03 1 0 1 a y
    01A CARD-MEM 3841 124 05/08/11:33 05/21/11:25 9 0 0 a y
    01A CARD-MEM 3843 12 05/09/01:01 05/21/01:00 13 0 0 a y

    I do not know what to make

    Regards

    Mike

    :confused::confused:
    Mike Jones
    [LSU Health Sciences Center]
    DEFINITY Communications
    System Generic 3vs and
    Generic 3si
    Maintenance
    555-204-105
    Inactive Forum User
    Hi Mikeydidit,

    I run every test but do not change nothing .

    "refresh spe-standby SPE B

    but ...

    Cannot interrupt Standby SPE while entering maintenance mode; please try later"

    status system 1st-cabinet SPE B
    SYSTEM STATUS CABINET 1

    SELECT SPE ALARMS TONE/ SERVICE SYSTEM SYSTEM
    SPE MODE SWITCH MAJOR MINOR CLOCK STATE CLOCK TONE
    1A down/entering auto 2 2 1A in standby standby
    1B active auto 0 0 1B in active active

    SERVICE CONTROL DEDICATED SERVICE BUS ALARMS BUS OPEN BUS
    TDM STATE CHANNEL TONES PKT STATE MAJOR MINOR FAULTS LEADS
    1A in n n 1 in n n 0 0
    1B in y y


    EMERGENCY SELECT SERVICE CABINET
    TRANSFER SWITCH EXP-LINK STATE MODE TYPE
    1A auto-on - ESCC
    1B auto-off -
    -
    -
    Today restart my Avaya ...asap


    See you later ... and thanks .

    Mike
    Mike Jones
    [LSU Health Sciences Center]
    Run this command before you reboot it. "sta spe" and post the results here.
    Inactive Forum User
    Hi Mikeydidit,

    "sta spe" in my version G3 V9 Rsi is STATUS SYSTEM .

    At 7:00AM ( in ITALY ) i restart my avaya and every thing is returned to narmality.

    status system 1st-cabinet SPE B
    SYSTEM STATUS CABINET 1

    SELECT SPE ALARMS TONE/ SERVICE SYSTEM SYSTEM
    SPE MODE SWITCH MAJOR MINOR CLOCK STATE CLOCK TONE
    1A standby auto 0 0 1A in standby standby
    1B active auto 0 0 1B in active active

    SERVICE CONTROL DEDICATED SERVICE BUS ALARMS BUS OPEN BUS
    TDM STATE CHANNEL TONES PKT STATE MAJOR MINOR FAULTS LEADS
    1A in y n 1 in n n 0 0
    1B in n y


    EMERGENCY SELECT SERVICE CABINET
    TRANSFER SWITCH EXP-LINK STATE MODE TYPE
    1A auto-off - ESCC
    1B auto-off -
    -
    -

    Thank's you for every thing ...

    Mike
    Mike Jones
    [LSU Health Sciences Center]
    I am glad that fixed it, but I look for the alarms to come back. I think that something is in trouble and needs you to fix it.

    Keep the maintenance manual number I gave you and download it for the Avaya website. It will come in handy and it's a tough one to find. Should the alarms come back run the alarms in the order they are in. The book 99.99% of the time will point you right to the problem if you follow the correct proceedures.
    Inactive Forum User
    Hi mikeydidit,

    my manual is 555-233-123 for versione R9si, i read as if it were the Bible but sometimes it must go beyond.

    Now not there are Major errors ( time 15:09 Italy ) .

    Regards

    Mike
    Mike Jones
    [LSU Health Sciences Center]
    No major alarms is Good. Now go have a good weekend...
    Inactive Forum User
    Hi mikeydidit,

    you have a good weekend i'll go to an wedding ( Sperlonga near the sea )!!!

    Thanks:)

    All Times America/New_York


    Copyright © 2014.'The International Avaya User Group. All Rights Reserved

    All material, files, logos and tradarks within this site are properties of their respective organizations.


    Terms of Service - Privacy Policy - Contact