Mar 12
    2008

    BCMrD with CM4 or greater...

    Steve Forcum
    [Subscriber Members]
    I'm trying to setup BCMrD for a customer....and the only installation documentation I've been able to find has been from 2001.

    I've found the patch and installed it. Now my login can connect to the server, but the BCMSVU login does not have adequate permissions. I've tried all of the standard user-profiles but nothing seems to work...

    Does anyone out there either know of more up-to-date user docs or how to configure the user-profile for the bcmsvu login used by the BCMr server?

    TIA,
    SJF
    Nick Kwiatkowski
    [Michigan State University]
    I'm trying to setup BCMrD for a customer....and the only installation documentation I've been able to find has been from 2001.

    I've found the patch and installed it. Now my login can connect to the server, but the BCMSVU login does not have adequate permissions. I've tried all of the standard user-profiles but nothing seems to work...

    Does anyone out there either know of more up-to-date user docs or how to configure the user-profile for the bcmsvu login used by the BCMr server?

    TIA,
    SJF

    BSMSvu (BCMR) is out of production, and really hasn't been updated in 4 years. I think the last officially supported switch it talked to was CM 3.1.4.

    Permissions should look like:

    display permissions bcmsvu
    COMMAND PERMISSION CATEGORIES

    Login Name: bcmsvu

    COMMON COMMANDS

    Display Admin. and Maint. Data? y
    System Measurements? y
    System Mgmt Data Transfer Only? n

    ADMINISTRATION COMMANDS

    Administer Stations? n Administer Features? n
    Administer Trunks? n Administer Permissions? n

    Additional Restrictions? n

    MAINTENANCE COMMANDS
    Maintain Stations? n Maintain Switch Circuit Packs? n
    Maintain Trunks? n Maintain Process Circuit Packs? n
    Maintain System? n Maintain Enhanced DS1? n
    Steve Forcum
    [Subscriber Members]
    I guess what I'm running into is I need to figure out how to translate the change permissions screen in CM3.1.4 and prior to the user-profiles screen in CM4.0.0 and greater.

    I called Avaya who told me "it needs to be suser, prof18". No dice and no response from them....argh.

    We just sold this to the customer and ordered it without issue, so there must be some level of support...in addition Avaya has a patch out there for getting BCMr to log into a CM4 switch....

    Very frustrating...

    SJF
    Trevor Grove
    [Subscriber Members]
    Did you resolve the BCMRD login issue ?

    I have the same on a CM5.2 S8300 !

    Login lets me in if tested through ASA....

    Regards
    Trevor

    All Times America/New_York


    Copyright © '.date("Y").'The International Avaya User Group. All Rights Reserved

    All material, files, logos and tradarks within this site are properties of their respective organizations.


    Terms of Service - Privacy Policy - Contact